1. The relevant data on this topic comes from the following report: H202305187905-01EN. Prolonged exposure is not recommended as it may damage the watch and its components.
2. The battery life may vary according to the settings, operation conditions and other factors. So the actual result may differ from the laboratory data.
Typical usage scenario: Wear all day, heart rate monitoring is always on and measures at 10-minute intervals, sleep monitoring enabled; static watch face selected; 150 pushed messages a day; raise wrist to see watch time 100 times per day; test blood-oxygen 5 times per day; bright screen operations for 5 minutes per day; receive 3 call notifications per day; exercise three times a week, with GPS on for 30 minutes each time.
Battery Saver Mode: Only steps and sleep are recorded.
Heavy usage scenario: Wear all day, heart rate monitoring is always on and measures at 1-minute intervals, auxiliary sleep monitoring and sleep breathing monitoring enabled; stress monitoring enabled; 150 pushed messages a day; raise wrist to see watch time 100 times per day; test blood-oxygen 5 times per day; bright screen operations for 15 minutes per day; receive 3 call notifications per day; exercise three times a week, with GPS on for 30 minutes each time.
3. According to the ISO 22810:2010 standard, the Amazfit Active Edge achieves a rating of 10 ATM, for a water-resistance of up to 100 meters, and is therefore suitable for splashes, snow, showering, swimming, and some high-speed water sports. It has passed third-party testing conducted by SWQC, and the report number is SWT2306-19. Remove the watch when taking a hot shower or trip to the sauna, since too much steam can affect the seal and make it less water-resistant in future. Do not wear the watch with a leather or metal strap when swimming - when preparing to swim, change to a fluoroelastomer strap or other suitable type. For more information, please visit the support page at: support.amazfit.com
4. Indoor positioning services are not supported. Positioning speed and accuracy may be affected by the surrounding environment. The number of satellites connected to simultaneously, and specific satellite connections, may depend on your location.
5. Navigation functions are compatible with these sports modes: Outdoor running, Walking, Outdoor cycling, BMX, Outdoor boating, Open water swimming. The shown straight line back to the start of a journey may not be a practical route to follow due to environmental factors; this is only intended to help you keep track of your position in relation to the start point of the journey.
6. Smart recognition of strength training exercises can only be engaged within the Strength Training sports mode. 25 exercises are able to be recognized at time of product release, including: Bodyweight squats, Bodyweight straight arm front squats, Barbell squats, Tricep pushdowns, Bent over rows, Barbell bench press, Sit-up holds, Knee-touch sit-ups, Dumbbell flys, Burpees, Burpee jumps, Overhead tricep extensions, Lying tricep extensions, Lateral raises, Jumping jacks, Lat pulldowns, Deadlift, Push-up, Shoulder press, Pull up, Bicep curls, Seated cable rows, Dumbbell drag curls, Straight-arm pulldowns, Russian twists. If an exercise is not auto-recognized by watch, the Zepp App can provide a list of muscle groups or exercise names to choose from.
7. Only cycling power meters that support BLE connection are compatible with the watch.
8. The list of 9 sports that are compatible with training templates and interval training include: Outdoor running, Treadmill, Outdoor cycling, Indoor cycling, Jumping rope, Rowing machine, Indoor fitness, Core training, Strength training. Training templates need to be created on the Zepp App, and up to 40 templates can be stored at a time; interval training can be set directly on the watch.
9. Corresponding sports modes include: Outdoor Running, Outdoor Cycling, Walking, Indoor Walking, Treadmill, Rowing Machine, Elliptical. The accuracy and sensitivity of the workout recognition feature varies from person to person, and are related to the posture and proficiency of the user during their workout. Short workout duration or frequent changes in posture may not trigger the automatic recognition feature. When you are driving a car or taking a bus, or taking part in other such activities, accidental recognition may be triggered if these activities are particularly similar to the selected workout mode. When you are conducting outdoor activities, if the GPS signal is poor or the AGPS data information has not been synchronized with the mobile phone for an extended period, these outdoor activities may be assessed as indoor activities.
10. Connection to these apps may depend on your location and smartphone device.
11. This product and the Zepp App are not medical devices and cannot be used for medical purposes, or as basis for diagnosis of any medical condition. Detection results are provided for reference only. Please consult professional medical institutions if you feel unwell. 24-hour monitoring of heart rate and blood-oxygen saturation (SpO₂) need to be enabled in the Zepp App. For heart rate monitoring, the user must enable Auto Heart Rate Monitor in the Zepp App, and the minimum value can be set to 1 minute. Abnormal heart rate alerts and the preset value need to be set in the Zepp App. To measure blood-oxygen saturation (SpO₂), please wear the watch tightly at one finger-width from the wrist, and keep your arm still for best results. SpO₂ alerts are sent if the detected rate is too low compared to the preset value, which needs to be set in the Zepp App, at a minimum of 80%. Movement, and environmental and physical characteristics can affect speed and accuracy of monitoring and measurement. The 24-hour stress level monitoring needs to be enabled on the watch or in the Zepp App. Alerts for high stress levels are based on the preset value, and prompts for the breathing exercise need to be enabled on the watch. To process the one-tap measurement and other manual metric measurements, please wear the watch tightly at one finger-width from the wrist, and keep your arm still for best results. Movement, and environmental and physical characteristics can affect speed and accuracy of monitoring and measurement.
12. Sleep monitoring can record night sleep and naps that last more than 20 minutes. Sleep Breathing Quality tracking needs to be enabled in the Zepp App or in the settings of the watch's Sleep feature.
13. Due to the device's storage limit, only a maximum of 20 membership cards can be added to the same account. Supported codes include Code 128, Code 39, UPC A, EAN 13, and EAN 8 and QR codes.
14. Morning updates need to be set in the Zepp App or in the watch settings, and the currently supported content is: weather, battery, sleep, schedule, PAI, yesterday's activity.
15. Track Run mode and Smart Trajectory Correction only support 200 meter and 400 meter running track lengths.
16. Virtual Pacer is only compatible with Outdoor Running, Track Run, and Treadmill sports modes.
17. Race Achievement Predictions only tracks data from the Outdoor Running mode. At least one 3km run must be completed in order to obtain performance prediction data. Predictions can be provided for the following race types: 3km race, two-mile race, three-mile race, 10km, half marathon, and full marathon.
18. The HUNT Fitness Study indicates that people who maintain a PAI score of 100 or higher show lower risk of hypertension, heart disease, and type-2 diabetes. HUNT Fitness Study: This study was conducted by Professor Ulrik Wisloff of the Faculty of Medicine, Norwegian University of Science and Technology. It lasted for more than 35 years and had more than 230,000 participants. To use this function, all-day heart rate monitoring must be enabled.
